Alpine TMI-M990 12, Opening/Closing, the Monitor

Basic Operation
12-EN
Opening/Closing the Monitor
1Press OPEN/CLOSE / SETUP.
The unit beeps 3 times and raises (or lowers) the
monitor automatically.
•The TMI-M990 is a precision device. With gentle handling, its
unique capabilities can be enjoyed for a long time.
•When the movable monitor is opened, do not place any object
on the monitor and be careful not to bump or apply any
pressure to the monitor while it is open. This can cause damage
to the mechanism.
•For your safety, some operation of the unit cannot be per-
formed while the vehicle is in motion. In this case, first stop the
vehicle and engage the parking brake, then perform the
operation.
•If there is something in the way when opening the display, the
display stops immediately. When this happens, remove the
obstruction and press OPEN/CLOSE / SETUP again.
•If there is something in the way when closing the display, the
display stops immediately. When this happens, remove the
obstruction and press OPEN/CLOSE / SETUP again.