Alpine TMI-M990 57

57-EN

1IONBUS cable

Used when setting up IONBUS

compatible products.

2IONBUS terminal

Used when setting up IONBUS

compatible products.

3IONBUS cable (Included)

4Power Supply Connector (Included)

5Reverse Lead (Orange/White)

Use only when a back-up camera is

connected. Connect to the plus side of the

car's reverse lamp that lights when the

transmission is shifted into reverse (R).

Switches the video picture to the back-up

camera. This is linked with putting the car

into reverse (R).

6Parking Brake Lead (Yellow/Blue)

Connect this lead to the power supply

side of the parking brake switch to

transmit the parking brake status signals

to the TMI-M990.

7Foot Brake Lead (Yellow/Black)

Connect to the vehicle's foot brake lead or

brake lamp lead.

8Switched Power Lead (Ignition)

(Red)

Connect this lead to an open terminal on

the vehicle's fuse box or another unused

power source which provides (+) 12V only

when the ignition is turned on or in the

accessory position. When connecting with

the IONBUS compatible head unit, do not

connect the ignition lead.

9Battery Lead (Yellow)

Connect this lead to the positive (+) post

of the vehicle's battery.

pChoke Coil with Fuse Holder (7.5A)

qGround Lead (Black)

Connect this lead to a good chassis

ground on the vehicle. Make sure the

connection is made to bare metal and is

securely fastened using the sheet metal

screw provided.

wRemote Control Output Lead (White/

Brown)

Connect this lead to the remote control

input lead. This lead outputs the

controlling signals from the remote

control.

eRemote Control Input Lead (White/

Brown)

Connect the external Alpine product to the

remote control output lead.

rMonitor Extension Cable (Included)

tDisplay Output Terminal

yRGB Input Terminal

uS Video Input Terminal

iAUX Input Terminals/AUX Output

Terminals

oSystem Switch

Change to “1:SYSTEM” when the TMI-

M990 is connected with an IONBUS

compatible head unit.

When not connected to an IONBUS

compatible head unit, change to

“2:STANDALONE”.

•Be sure to turn the power off to the unit

before changing the switch position.

Contents

Main TMI-M990 OWNER'S MANUAL ALPINE ELECTRONICS OF U.K. LTD. Page Page Page 1 Contents Operating Instructions WARNING Getting Started Basic Operation Other Useful Features Contents 3 WARNING 4 CAUTION 5 PRECAUTIONS Getting Started 6 About the Remote Control Warning Notes on Using the Remote Controlmmmmmmmmmmm 7 About the indicators and the microphone System switch Input indicator Using the TMI-M990 with an IONBUS connection Getting Started 8 How to Read This Manual 16 This manual details how to operate the TMI-M990 and the supplied remote control RUE-4199. Page 10 2 11 2 seconds to turn off the unit. 12 Opening/Closing the Monitor 1 The unit beeps 3 times and raises (or lowers) the monitor automatically. 13 Adjusting the Display Back and Forwards 1 2 3 14 Adjusting the Monitor Viewing Angle 1 15 Moving the Monitor to be Flat 1 2 Adjusting the Volume 16 Switching the Source 1 Each press of the button will cycle through the modes as follows: 17 Switching Display Modes 1 18 Supplementary information This page includes supplementary information for pages 9 to 17. Please refer to these pages. 19 20 About VISUAL EQ TM 1 EQ. 21 3 22 3 4 5 23 Adjusting and Storing VISUAL EQ TM 1 24 3 4 5 6 7 25 8 9 Page 27 28 Rear Entertainment Function Setting item: AUX OUT1, AUX OUT2 LINK, NAVI., AUX-1, AUX-2, AUX-3, DVD 29 Switching the Function of the Remote Sensor Setting item: REM.CON IN FRONT, REAR-1, REAR-2 30 Switching the Visual Source Only (Simultaneous Function) 1 2 Page 32 Supplementary information This page includes supplementary information for pages 20 to 31. Please refer to these pages. 33 About the Setup <Setup menu chart> 34 General Setup Operation Page 36 Adjusting Brightness Setting item: BRIGHT Setting content: 15 ~ +15 1 Adjusting Color of Picture 37 Adjusting Tint of Picture 1 Adjusting Display Contrast 1 38 Setting the Illumination Brightness Setting item: DIMMER ON/OFF/AUTO 39 Adjusting the Illumination Level Setting item: DIMMER Lvl. 2 ~ +2 1 40 Selecting the Monitor Opening Angle Setting item: SLIDE BACK/FRONT Adjusting the Monitor Viewing Angle 41 Sound (Beep) Guide Function Setting item: BEEP ON/OFF Changing Lighting Color 42 Navigation Audio Interruption Volume Adjustment Setting item: NAVI MIX LEVEL + 7 (OFF, +1~+15) Head Unit Linked Functions 43 AUX IN/S-IN SETUP 1 2 3 44 4 5 6 Setting the AUX Mode Setting item: AUX IN 1, 2, 3, SIG. 45 Setting the S-IN Mode Name External Equipment to Be Displayed (AUX) Name the S Video Input to Be Displayed (S-IN) External Input Audio Level Adjustment TV (Optional) 46 TV Operation Page 48 Operating from the Head Unit Operating the Head Unit with the Remote Control RUE-4196 Information Indication 50 Information Specifications MONITOR SECTION AV-INTERFACE UNIT SECTION REMOTE CONTROL Warning 52 Caution Precautions IMPORTANT 53 Installation Continued Installing the Monitor 54 About the system switch It is necessary to change the system switch before installing this unit. Installing the AV-Interface Unit 1 attach two pieces of Velcro fastener to the bottom of the AV-Interface Unit. 55 Parking Brake Lead Connection Foot Brake Lead / Parking Brake Lead Connection Connection Diagram of SPST Switch (Sold Separately) 56 Connections (TMI-M990 Wiring Diagram) 57 58 System Example When Connecting External Equipment (If an IONBUS Compatible Head Unit is not connected) Page 60 61 When connecting Navigation System 62 63 LIMITED WARRANTY