Alpine TMI-M990 58, System Example

58-EN
Installation and Connections
When Connecting External Equipment (If an IONBUS Compatible
Head Unit is not connected)
TMI-M990
AV-Interface unit
1
3
2
5
6
6
7
REMOTE IN (AUX2) REMOTE OUT
4
To Audio Input terminal
To Video Input terminal
When the System Switch is set to “STANDALONE”
1RGB Cable (Included with NVE-N852, not included with NVE-N871A)
2Power Supply Connector
3RGB Input Terminal
Connect this to the RGB output terminal of the Navigation System.
4AUX Audio Output (AUX1) (L) Terminal
When the System Switch is set to STANDALONE:
AUX1 Audio Output Terminal is used as the audio output for the main unit.
A separately sold Amplifier Speaker (KAX-551N) is required if using this unit by itself.
There is no output from the AUX1 Video Output Terminal.
5AUX Video/Audio Output (AUX2) Terminal
6RCA Extension Cable (Sold separately)
7Remote Control Input Lead (White/Brown)
Navigation system
(Sold Separately)
Amplified Speaker
(Sold Separately)
Rear monitor 2
(Sold Separately)
To Audio Input terminal
(White/Brown)
(White/Brown)
NVE-N852A/NVE-N871A
•When the NVA-N751AS is connected for the Navigation System, use the RGB conversion cable
KWE-503N (Sold separately).
KAX-551N
System Example