63-EN
1S Video Input Terminal
2Display Output Terminal
3IONBUS Terminal
4Ai-NET Connector
Only an Ai-NET compatible CD changer, XM Radio Module can be connected. All other Ai-
NET products are not compatible.
5DVD Audio Link Terminal
6
S Video Cable (Included with head unit)
7Monitor Extension Cable (Included)
8IONBUS Cable (Included)
9IONBUS Cable (Included with CONVERTER)
pDVD Audio Link Cable (Included with Multimedia Manager)
qAi-NET Cable (Included with CD changer)
wRoad EQ Microphone Terminal
eMicrophone Terminal automatic adjustment
rMicrophone Terminal Connection Cable (Included with Multimedia Manager)
tS Video Output Terminal
ySystem Switch
Change to “1:SYSTEM” when the TMI-M990 is connected with an IONBUS compatible head
unit.
*1Ferrite Core
Attach the Ferrite Core (included) to the both ends of the IONBUS cable at a location where
the product does not touch the core when installing.
(When connecting to the main unit, attach the core at a location of approx. 10 cm from the
terminal end.)
When attaching the core to the cable from the monitor main unit, also attach to the both
ends.
Two pieces are attached to TMI-M990, PXI-H990, KCI-500B.
*2Connect only when using the Road EQ microphone built in the main unit.
•IONBUS compatible products can be connected in any order. The above connection chart is
an example.
•When connecting with the IONBUS compatible head unit, do not connect the ignition lead.
•Use if connecting a KCI-500B to an Ai-NET compatible CD changer, XM Radio Module.
10cm