SWITCHERS
CB4206MR 6 feet,
CB4212MR 12 feet,
CB4225MR 25 feet,
CB4250MR 50 feet,
CB4275MR 75 feet,
CB42100MR 100 feet,
CB42150MR 150 feet,
SUPER HIGH RESOLUTION 5 BNC TO 5 BNC
COAXIAL CABLE
CB4400MR Bulk cable (500 feet minimum)
CB4406MR 6 feet,
CB4412MR 12 feet,
CB4425MR 25 feet,
CB4450MR | 50 feet, |
CB4475MR | 75 feet, |
CB44100MR | 100 feet, |
CB44150MR 150 feet,
HIGH RESOLUTION PLENUM-FLEX 5BNC-
5BNC COAXIAL CABLE
CB5000PL- 3 feet, 5BNC M to
5BM00035BM
CB5000PL- 6 feet, 5BNC M to
5BM00065BM
CB500PL- 12 feet, 5BNC M to
5BM00125BM
CB5000PL- 25 feet, 5BNC M to
5BM00255BM
CB5000PL- 50 feet, 5BNC M to
5BM00505BM
CB5000PL- 75 feet, 5BNC M to
5BM00755BM
CB5000PL- 100 feet, 5BNC M to
5BM01005BM
CB5000PL- 150 feet, 5BNC M to
5BM01505BM
CB5000PL- 200 feet, 5BNC M to
5BM02005BM
CB5000PL- 250 feet, 5BNC M to
5BM02505BM
SUPER HIGH RESOLUTION
CHANNEL COAX CABLE
CB5100PL – | 3 feet, |
5BM00035BM |
|
CB5100PL- | 6 feet, |
5BM00065BM |
|
CB5100PL – | 12 feet, |
5BM00125BM
CB5100PL – 25 feet,
5BM00255BM
CB5100PL – 50 feet,
5BM00505BM
CB5100PL – 75 feet,
5BM00755BM
CB5100PL – 100 feet,
5BM01005BM
CB5100PL – 150 feet,
5BM01505BM
CB5100PL – 200 feet,
5BM02005BM
CB5100PL – 250 feet,
5BM02505BM
TROUBLE SHOOTING GUIDE | 10 |
•Please make sure, that the input signal formats are the same for the input (source) and output (display).
•Please make sure that the input signal amplitude levels are as follows:
1.RED, GREEN, and BLUE are less than 10 V.
2.SYNC is less than 5.0 V and more than 0.3 V.
•Please use the appropriate input voltage
110VAC or 220 VAC.
•Please make sure that proper quality of cables is used. We recommended ALTINEX made cables for the best results.
•If a problem arises after continuous usage at higher voltage, higher temperature, higher humidity, or at other extreme environmental conditions, please correct the problem.
•If a problem exists with the switcher, please reset the unit by pressing the RESET key for more than 2 seconds
•Make sure that all channels (inputs) are not OFF (i.e. RED LED is not ON next to the ALL OFF key).
•If you are using any controllable software or
•hardware to control the MX2226AT, then first verify operation of the unit using MX Control software available from the ALTINEX
11
11