Altinex manual About Your MX2456RM, Technical Specification, Audio, Rgbhv

SWITCHERS

required to correct the interference at his own expense.

∙Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

ABOUT YOUR MX2456RM 2

The MX2456RM is a video and audio switcher with six VGA inputs, which can be connected to a single VGA output and six stereo or balanced audio inputs, which can be connected to a single stereo or balanced audio output. It allows the non- simultaneous connection of up to six computers or six video and six audio sources to a monitor or projector and to any audio system.

The MX2456RM can pass a variety of video signal types: RGBHV, RGBS, RGsB, Component Video (Y, R-Y, B-Y), S-Video and Composite Video. The MX2456RM is controllable by using its built-in front panel or through RS-232.

Each of the VGA inputs is ground loop isolated and can promote individual equalization of video gain according to different cable lengths.

The MX2456RM has a video bandwidth of 300 MHz and an audio bandwidth of 40 kHz.

TECHNICAL SPECIFICATION		3
FEATURES/	Audio	RGBHV
DESCRIPTION
GENERAL
Inputs	6	6
Input	Six 5 conductor	Six 15-pin HD-F
Connector	terminal blocks
Outputs	1	1
Output	One 5 conductor	One BNC Female
Connector	terminal block
Compatibility	Stereo or balanced	VGA, RGBHV,
	audio	RGBS,RGsB, &
		C-Video
		(Y, R-Y, B-Y)

Table 1. MX2456RM General

MECHANICAL	MX2456RM
Width (inches)	1.75in (44mm)
Height (inches)	17.00 in (432mm)
Depth (inches)	9.00in (229mm)
Weight (pounds)	5lbs (2.28kg)
Finish	Gray
Front/Rear Panel	Lexan
T° Maximum	50°C
Humidity	90% non-condensing
MTBF (calculations)	40,000 hrs (min)

Table 2. MX2456RM Mechanical

ELECTRICAL	Audio	RGBHV
Input Signal
Differential	1.8V p-p	-
Analog	-	1.2V p-p
Composite Video	-	-
Impedance	10 k Ohms	75 Ohms
CMRR	80dB @ 10 Hz to	-
	20k Hz
Input Sync
Signals
Composite,
Horizontal, &	-	TTL (+/-)
Vertical
Output Signals
Analog	-	1.2V p-p
Fall/ Rise Time	-	less than 2.4ns
Impedance	600 Ohms	75 Ohms
Crosstalk	80 dB @ 1kHz	-48dB @ 10 MHz
Differential	1.8Vp-p	-
Signal to Noise	More than 95 dB	-
Ratio
Bandwidth	10 Hz – 40 kHz	300MHz
Stereo Signal	More than 60dB	-
Separation	@ 20 kHz
Output Sync
Signals
Impedance	-	22 Ohms
Power
External Power	90V AC to 260V AC 50/60Hz
Power	14 watts max.
Consumption

Table 3. MX2456RM Electrical

3