Bluetooth Portable Mini Speaker | Product Highlights |
|
Quick Start Guide
2W Adjustable
Speaker
|
| LED |
|
|
|
|
|
|
| ||
| APS02F |
|
| Line, Off, | |
aluratek.com |
|
| BT Switch | ||
qsg Q10280 v2 Copyright © 2013 Aluratek, Inc. All Rights Reserved. |
|
|
|
| |
3.5mm connector
Mini USB port
Operation
Listening to Music (Wired connection)
1.Unwind the connector cable from around the speaker
2.Connect any digital device with a 3.5mm audio jack port like an iPod, iPad, iPhone, smartphones and tablets
3.Turn the speaker to LINE. The blue LED will illuminate
4.Press play from your connected device and enjoy!
Pairing (Wireless connection)
Please make sure the device supports A2DP profile. The pairing procedure will vary depending on the actual device. Please refer to the user guide of your device for detail instruction. The general pairing procedures are as follows:
1.Turn the switch to BT. The blue LED at the base will start flashing.
2.Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select APS02F when it is found.
3.After connecting successfully, the blue LED will flash once every 3 seconds
Note: Please make sure the audio output is set to Bluetooth / APS02F for audio streaming from the device.
Charging the battery
1.Connect the provided USB charging cable to the mini USB port on the speaker.
2.Connect to a USB port on your computer or laptop
3.While charging, the power indicator LED will turn red.
4.When fully charged, the power indicator will turn off.
Tech Support & Warranty Information
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/support
Local (Tustin, CA):
Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship for 1 Year from the date of purchase.
For more information, please visit:
You can register your product online at:
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.
