12
Step 5. AC Power
Locate the power cable end connection. Attach the AC adapter (labeled ‘camera’) to end of cable coming from the camera.
www. jascoproducts.com
TROUBLE SHOOTING
If you are having trouble operating this product, please consult the guide below. If you have any questions or feel the camera system is not operating correctly, or you simply need additional information, please visit our web site www.jascoproducts.com, or contact our Technical Support Group
No camera picture
1.Check all connectors. Make sure camera(s) and receiver are powered ON.
2.Ensure camera(s) and receiver are set to correct channel(s).
3.Make sure camera is within range of receiver.
4.Adjust the antenna for the camera, monitor or both to obtain best image.
