7
Wireless Camera Systems - 45234, 45236, 45239, 45246. Each system can accept a maximum of two cameras.
CAMERA CHANNEL SELECTION
Each wireless camera must be assigned to a specific channel (1 or 2) through the use of a slide switch located on the inside of the camera housing.
First slide off the sun shield and then unscrew the lens from the camera. The receiver or monitor must have its channel selection set to the same corresponding number.
Channel Selection switch
2 1
In a two camera system, one camera is set to Channel 1 and the other is set to Channel 2.
The receiver or monitor must be set to the 2 camera position in order to view both cameras alternately (see receiver or monitor manuals for specific channel selection requirements).