13
Blank monitor
1.Make sure receiver or monitor is switched ON, and the correct video input has been selected.
2.Ensure AC adapters are completely plugged into the socket and the camera and/or receiver’s power indication light is on.
Interference on camera picture
1.Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal.
2.Try repositioning the camera, monitor (receiver) or both to improve the reception quality.
3.If a camera is positioned close to the monitor, point antenna away from the receiver.
4.Reposition other nearby equipment transmitting on the 900MHz frequency.
5.Adjust the antenna for the camera, monitor or both to obtain best image.
