8
INSTALLATION
Wall Mount or Ceiling Mount — you will need:
-Drill
-3/8" Drill bit (if running cable thru wall or ceiling)
-1/8" drill bit (for drilling screw pilot holes if mounting into wood or
-3/16" drill Bit (for drilling holes for plastic anchor s if mounting onto drywall or brick material)
-a screwdriver.
-Adjustment wrench (included)
Step 1. Mounting preparation Once a suitable location for the camera has been selected and
the cable route has been determined, you will need to use the camera’s mounting bracket as a template to mark holes for drilling. Mark three holes on the
wall for the anchors or screws as shown. Please take care to mark the center of the holes.
Note: Before mounting camera permanently, check to ensure the appropriate channel has been selected (see Channel Selection) to provide good reception at the receiver/monitor.