Jasco 45245 user manual Mounting bracket, aIf mounting to a stud, wood surface or other

10

Step 3. Mounting bracket

(a)If mounting to a stud, wood surface or other

non-brick material, use the 1/8” drill bit to drill pilot holes; drill holes. Align holes in mounting bracket to drilled holes, insert screws and screw in until plate has secure fit. Do not over tighten screws.

(b)If mounting to drywall or brick material, use plastic anchors (see Figure C). Using 3/16” drill bit (masonry bit, if drilling into brick), drill holes and insert anchors into drilled holes for snug fit. Align holes in mounting bracket to drilled holes, insert screws and screw in until plate has secure fit. Do not over tighten screws.

Figure C (Mounting bracket using plastic anchors)

Plastic anchors

(c)Using included adjustment wrench, slightly loosen the hex head bracket nuts on camera bracket to position camera’s multi-axis bracket so camera is pointed toward desired viewing area. Tighten bracket nuts. Do not over tighten nuts.