15
Amplifier assembly replacement continued:
1
Edge of amplifier assembly
2 3 4 5 6 7
1
6 Closeups of the led PCB cable and connector are shown above. The black wire of the cable is closest to the ribbon cable. The cable only fits in one way.
Edge of amplifier assembly
2 3 4 5 6 7
7 Now for the closeups of the driver terminals. Make sure the cables are reconnected to the same terminals they were removed from (but on the new amplifier assembly). Once again, they are: (2) solid yellow, (3) yellow and black,
(4)blue and black, (5) solid blue,
(6)green and black, and (7) solid green. Do not force cable removal or connection, although