11
Mid Frequency Driver replacement:
1 Follow steps
1 2
8 | 3 |
7 | - | + | 4 | |
6 | 5 | |||
| ||||
1 |
|
| 2 | |
8 |
|
| 3 |
74
6 | +- |
5 |
2 Eight screws and locking washers may be removed from the mid frequency driver cover plate using the phillips head screwdriver.
3 Keep the eight screws and locking washers in a safe place.
Pull out +-
+-
Pull out
4 The mid frequency driver cover plate should easily lift right off of the horn. Holding down the horn assembly with one hand while lifting up on the cover plate with the other hand may help. The positive (solid green) and negative (green and black) cables are still attached to the mid frequency driver cover plate terminals. Remove the cables from the terminals simply by pulling on the end of each cable. Do not force cable removal, although needle- nose pliers may aid in tightly crimped cables.