VLAN Tagging Menu
Voice Gateways System Manual 27
The VLAN page enables defining up to 16 VLANs, and it includes the following
components:
3.6.2 Adding and Deleting VLANs
1Click on the Add VLAN button. The VLAN Editor (Add) is displayed:
Table 3-4: VLAN Page Parameters
Parameter Description
Tagged Port Membership A table displaying the defined VLANs. For details on
modifying the table refer to Section 3.6.2 below.
Untagged VLAN ID The VLAN ID that is defined for untagged data on the WAN
port (text box on the left side) and the LAN port (text box on
the right side). This parameter must be consistent with a
properly configured VLAN in the tagged port membership. For
examples on VLAN configuration, see Section 3.6.4 and
Section 3.6.5.
The range for both parameters is from 1 to 4094.
Default VLAN ID The text box on the left side is for the WAN port. This is the
VLAN defined for management frames (SNMP, HTTP, TFTP)
arriving on the WAN port.
The DRAP packets are tagged with the default VLAN
configuration.
The range is from 1 to 4094.
NOTE
Management of the unit can only be done from the WAN port.
To add a VLAN: