60 Operation
Chapter 3 - Using the Web Configuration Server
Acknowledge Time The Acknowledge Time is the timeout out to be used between
allocation requests. If no confirmation is received within this time,
a new allocation request should be sent.
The range is 1 to 10 (x 100 milliseconds).
The default is 3 (300 milliseconds).
Clear Count The Clear Count parameter indicates the number of allocation
requests (ALLOC) that can be sent without being acknowledged
before clearing all pending reservation attempts.
Note: Established reservations (existing calls) are not cleared.
The range is 1 to 10.
The default is 2.
Retry Count The Retry Count parameter indicates the number of allocation
requests (ALLOC) that can be sent without being acknowledged
before reaching a decision that the unit should search for another
server. When this number is reached established reservations are
to be cleared (existing calls are disconnected) and auto discovery
procedure is initiated.
The range is 1 to 10.
The default is 5.
RTP Packing Ratio The RTP Packing Ratio parameter defines the packet size to be
used until an actual call is established. It is recommended to set a
value that supports the worst-case scenario, e.g. the smallest
expected size (20 milliseconds) that results in the highest
expected number of packets per second.NOTE: The configured
RTP Packing Ratio is used by the unit until an actual call is
established. Once a call is established, the unit will use a packet
size according to the actual value being used for the call.
The available range is 10 to 100 milliseconds in multiples of 10
(10, 20, …100).
The default value is 30 milliseconds.
Table 3-13: DRAP Configuration Page Parameters
Parameter Description