Amana ADB-1 warranty Items not properly dried, Moisture is present on, Dishwasher interior after

Troubleshooting

PROBLEM		SOLUTION
Items not properly dried/	•	Be sure Heated Dry is selected.
moisture is present on the	•	Water droplets may form on the inner door as part of the drying process.
dishwasher interior after the	•	Use a rinse aid separate from the detergent like Jet Dry* or Cascade Rinse Aid*
dry cycle		regularly, to improve drying. Turn the rinse aid selector toward the MAX setting.
	• Check water temperature. Incoming water should be 120° F (49° C).
	•	Select Sanitize.
	• Increase detergent amount to match water hardness (pg. 5).
	• Load properly. (pg. 3-4)
	•	Plastic and items with non-stick surfaces are difficult to dry because they have a
		porous surface which tends to collect water droplets. Towel drying may be necessary.
	• Glasses and cups with concave bottoms hold water and require towel drying. Locate
		these items on the more slanted side of the rack for improved results.
Dishware is chipped	•	Load dishes according to instructions so they do not strike each other (pg. 3-4).
	• Washing fine antique china/crystal in the dishwasher is not recommended.
	• Do not load glasses over the tines.
	•	Do not overload.
Sanitized light does not	•	Sanitize was not selected.
illuminate at the end of the	•	Sanitization can only be achieved with the Auto Wash (select models), Heavy Wash,
cycle (select models)		Normal Wash or Quick Wash cycles.
	• Sanitization may not be achieved if there is an interruption of the cycle, power failure
		or if incoming water temperature is below 120° F (49° C).

*Brand names are trademarks of the respective manufacturer.

13