Amana ADB-1 warranty Removing the Upper Rack, Utensil Baskets

Loading

Convertible Tines (select models) in the back, right corner can be adjusted to provide narrow spacing for loading plates or wide spacing for loading deep bowls, pots or pans. Flip tines up for narrow spacing or down for wider spacing.

Back

Removing the Upper Rack

The upper rack can be removed when tall or oversized items need to be loaded into the lower rack. Unload the rack before removing it from the dishwasher.

To remove rack:

1.Roll the rack 1⁄3 to 1⁄2 of the way out.

2.To remove each plastic push tab rack stop from the

Utensil Baskets

Removable Standard Utensil

Basket (select models)

For best cleaning results, prevent items from nesting together by placing some items in the basket with handles up and some with handles down. Load knives, handles up and spoons and forks handles down.

Be sure that thin, finely pointed items do not extend through the basket. This could block the lower wash arm.

Split & Fit™ Utensil Basket (select models)

The split silverware basket can be separated and placed in several locations in the bottom rack. Load flatware and utensils into both sections or just one, depending on your load.

To split the basket, hold the basket firmly along

the sides. Unlock

baskets as shown here.

Auxiliary Basket (select models)

Use this supplemental basket in the upper rack for loading miscellaneous items and utensils. This also a safe place to sharp knives and items.

end of each track, push inward (toward the rack) on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight out. Take care to support the track while removing rack

stops.

3. Roll the rack all the way out of the track and remove from the dishwasher.

To replace:

Push Tab

• Reverse the above Rack Stop

procedure to replace the rack into

Important

The dishwasher will operate correctly if wash arm is not with one of

holes on

4