Amana ADB-2 warranty Options, Option Description USE with Cycles

Cycles, Options and Lights

Options

In addition to choosing a cycle from page 7, choose as many available options as are needed for your dishload.

OPTION	DESCRIPTION	USE WITH CYCLES
	Sanitizes dishware. When the cycle monitor recognizes that	Heavy Wash*
Sanitize	proper conditions have been met, a Sanitized light will activate	Normal Wash*
(select models)	at the end of the cycle. Sanitization may not be achieved if	Quick Wash*
	there is an interruption of the cycle, power failure or if the	Auto Wash*
	incoming water temperature is below 120° F (49° C).	(select models)
Hi Temp	Hi Temp Wash provides additional heat during the wash portion
	of the cycle, which ensures proper water temperature for better	All cycles
Wash	cleaning and drying results. It also adds an additional rinse to	(except Rinse Only)
	the cycle which improves results in hard water situations.	(select models)
	For enhanced drying results select this option. When Heated
	Dry is not selected, towel drying of some items such as plastic
Heated Dry	and items with non-stick surfaces may be necessary and more	All cycles
	moisture may be noticed adhering to the dishwasher interior.	(except Rinse Only)
	In models with plastic interiors, it is normal to notice vapor	(select models)
	escaping from the door vent as the heat dries your dishes.
	Vapor will escape even if Heated Dry is not selected.
Delay	Used to automatically start the cycle at a later time. See	All Cycles
	page 10 for instructions.

* Only these cycles have been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization.

CAUTION

CAUTION – In models with plastic interiors, it is normal to notice vapor escaping from the door vent in the upper left corner of the door as the heat dries your dishes. The vapor is hot and may cause minor burns.

8