Amana ADB-2 warranty Lights/Display select models, Indicator Description

Cycles, Options and Lights

Lights/Display (select models)

INDICATOR	DESCRIPTION
Time Remaining Display	Shows approximate minutes remaining in a cycle. The symbol “2H” will appear when cycle time
(select models)	is greater than 99 minutes. Cycle times shown in the numerical display (select models) will
	increase or decrease, based on each load’s soil level, water temperature and selected options.
Clean	Illuminates at the end of the cycle and remains lit until the door has been open for 30 seconds
(select models)	continuously.
Drying	Illuminates during the entire dry period and goes out when the cycle is completed.
(select models)
Washing	Illuminates during all rinse and wash portions of the cycles.
(select models)
Heating Delay	Illuminates when cycle is being extended to heat the water.
(select models)
Sanitized	Illuminates at the end of the cycle when conditions have been met to achieve sanitization. The
(select models)	light will remain lit until the door has been open for 30 seconds continuously.
On	Illuminates during all rinse, wash and dry portions of the cycle and goes out when the cycle is
	completed.

Notes

•When Sanitize (select models) is selected, cycles are monitored to assure sanitization. The Sanitized light will not activate if sanitization requirements are not met. This could happen if the cycle is interrupted, power failure occurs or incoming water temperature is below 120° F (49° F).

•The Clean and Sanitized indicator lights (select models) will not relight after a power failure until after the next cycle is run.

9