Electrolux EOD43103 The cooling fan, Control panel indicator neons, Condensation and steam

Models: EOD43103

1 32
Download 32 pages 38.22 Kb
Page 5
Image 5
The cooling fan

away. During this period an odor may be emitted, it is therefore advisable to open a window for ventilation.

The cooling fan

The cooling fan comes on immediately the top oven or grill is switched on. It may run on after the ovens are switched off until the ap- pliance has cooled. During the cooling down period the cooling fan may switch on and off.

Control panel indicator neon(s) Warning! Always allow the cooling fan

to cool the appliance down before switching off the electrical supply to carry out cleaning or maintenance.

Control panel indicator neon(s)

The indicator neon will operate when the oven(s) is switched on. The indicator neon will glow. It may turn on and off during use to show that the setting is being maintained. If the neon does not operate as the instructions indicate the controls have been incorrectly set. Return all controls to zero and reset fol- lowing the instructions for the required set- ting.

Condensation and steam

When food is heated it produces steam sim- ilar to a boiling kettle. The vents allow some of this steam to escape. However, always stand back from the appliance when opening the door(s) to allow any build up of steam or heat to release.

If the steam comes into contact with a cool surface on the outside of the appliance, e.g. a trim, it will condense and produce water droplets. This is quite normal and is not caused by a fault on the appliance.

To prevent discoloration, regularly wipe away condensation and foodstuff from surfaces. For your safety wall coverings at the rear of the appliance should be securely fixed to the wall.

Cookware

Baking trays, dishes etc., should not be placed directly against the grid covering the fan at the back of the oven.

Do not use baking trays larger than 30cm x 35cm (12” x 14”) as they will restrict the cir- culation of heat and may affect performance.

electrolux 5

Setting the Time

Condensation and steam The oven only operates when the time has been set.

1.When the appliance is connected to the electrical supply or when there has been

a power cut, Time Cookware flashes automati- cally.

2. Using the Setting the Time or button, set the current time.

3.After approx. 5 seconds, the clock stops flashing and the clock displays the time of day set.

The appliance is now ready to use.

Initial Cleaning

Before using the oven for the first time you should clean it thoroughly.

Initial Cleaning Warning! Do not use any caustic, abrasive cleaners! The surface could be damaged.

Manual background To clean metal fronts use commercially available cleaning agents.

1.Turn the oven function switch to oven lighting .

2.Remove all accessories and the shelf support rails and wash them with warm water and washing up liquid.

3.Then wash out the oven with warm water and washing-up liquid, and dry.

4.Wipe the front of the appliance with a damp cloth.

Page 5
Image 5
Electrolux EOD43103 The cooling fan, Control panel indicator neons, Condensation and steam, Cookware, Setting the Time