Amana ADB-2 Utensil Baskets Removing the Upper Rack, Removable Door Utensil Baskets, To replace

Loading

The Folding Tines (select models) located in the front right corner provide convenient loading space for large, bulky items like pots and pans or mixing bowls.

To lower tines, carefully push the tines out of each holder toward the center of the rack and lay the tines down.

Utensil Baskets

Removing the Upper Rack

The upper rack can be removed when tall or oversized items need to be loaded into the lower rack. Unload the rack before removing it from the dishwasher.

To remove rack with tab-lock rack stops :

1.Roll the rack 1⁄3 to 1⁄2 of the way out.

2.Locate the rack stops at the end of each track. Squeeze the tab in the middle of the rack stop and pull the rack stop straight out. Take care to support the rack while removing the rack stops.

Removable Door Utensil Baskets

For best cleaning results, prevent items from nesting together by placing some items in the basket with handles up and some with handles down. Load knives handles up and

3.Roll the rack all the way out of the track and remove from the dishwasher.

To replace:

Tab Lock

Tab Lock

Rack Stop

spoons and forks handles down.

To remove the basket(s) from the door:

1. Grasp the utensil basket by the handle. Slide it toward the top of the door.

2. Lift the basket off the securing knobs.

Securing Knobs

To replace the basket(s) in the door:

1. Align the slots on the backside of the utensil basket with knobs on the door.

2.Set the utensil basket on the securing knobs.

3.Slide the basket toward the bottom of the door until it locks into place.

Auxiliary Basket (select models)

Use this supplemental

basket in the upper rack for loading miscellaneous items and utensils. This is also a safe place to load sharp knives and pointed items.

Style may vary by model

1.Replace the

dishwasher rack by guiding the wheels into the tracks.

2.Push each rack stop squarely into the end of the track until the catch pops into the small hole on the side of the track.

Important:

The dishwasher will not operate correctly if the wash arm is not aligned with one of the water inlet holes on back wall of the dishwasher.

5