20" (50.8 cm) Freestanding Gas Range

PRODUCT MODEL NUMBERS

AGG222VD

Gas supply: Provide a gas supply line of 3/4"

(1.9 cm) rigid pipe to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size can be 1/2" (1.3 cm) minimum. Usually, LP gas suppliers determine the size and materials used in the system.

If local codes permit, a new CSA design-certified, 4-5 ft (122-152.4 cm) long, 1/2" (1.3 cm) or 3/4"

(1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line.

A 1/2" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the appliance gas pressure regulator.

Electrical: A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this range be provided.

Do not use an extension cord.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

PRODUCT DIMENSIONS

41-11/12" (106.6 cm)

25-7/8"

19-3/4"

(50 cm)

(65.9 cm)

 

CABINET OPENING DIMENSIONS

13" (33.0 cm) max. upper cabinet depth

18" (45.7 cm) min. clearance upper side cabinet to

20" (50.8 cm) min. cabinet opening width

20-1/8" (51.12 cm) opening width

2" (5.1 cm) min. countertop space to side wall or other combustible material

For minimum clearance to top of cooktop, see NOTE

countertop

This shaded area recommended for electrical outlet.

2 1/2"

(6.4 cm)

This shaded area recommended for installation

of gas pipe

10" (25.4 cm)

24"

(61.0 cm)

5 1/2"

4" (14 cm) (10 cm)

4"

(10 cm) 2"

(5.1 cm)

NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than 1/4" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. 30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.

IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. W10173755

Instructions packed with product. Specifications subject to change without notice.

08-27-08

 

Page 1
Image 1
Amana AGG222VD dimensions 20 50.8 cm Freestanding Gas Range, Product Model Numbers, Product Dimensions