GE Monogram Drawer Freezer Refrigerator Product Dimensions and Clearances, Installation Space

Planning Information

PRODUCT DIMENSIONS AND CLEARANCES

35-7/8" Case Width

69-5/8"

Depth Including Handles

29-1/2" - Tubular Handles

30-1/4" - Professional Handles

27-1/2" Depth

35-7/8"

These Monogram free-standing refrigerators require the following clearances for proper air circulation, plumbing and electrical connections.

Air Circulation Clearances:

•1/8" on each side

•1/2" at the back side

Installation in a corner:

•Allow 4" clearance on each side to an adjacent wall for a 90° opening and access to drawers.

•Allow 15" clearance to wall on each side for removal of drawers.

THE INSTALLATION SPACE

The opening width must be at least 36".

36" min.

Wall View

Electrical

Area

70" min.

Water Supply

Water And Electrical Locations

The opening must be prepared with the electrical and water supply located as shown.

Additional Specifications

•A 115 volt 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded

3-prong electrical receptacle recessed into the back wall.

NOTE: GFI (ground fault interrupter) is not recommended.

•The cold water line can enter the opening through the floor or through an adjacent cabinet, as close to the back

wall as possible. The water line should be GE SmartConnect™ Refrigerator Tubing or 1/4" O.D. copper tubing between the cold water line and water connection location at the rear of the refrigerator. Installation of an easily accessible shut off valve in the water line is recommended.

3