GE Monogram Drawer Freezer Refrigerator Tools Required Flooring, Materials Required

Installation Instructions

TOOLS REQUIRED	FLOORING
• Adjustable wrench	For proper installation, this refrigerator must be placed on
• 3/8" and 5/15" socket ratchet/driver	a level surface of hard material that is at the same height
• Phillips head screwdriver	as the rest of the flooring. This surface should be strong
• 3/32", 1/8", 1/4" Allen wrenches	enough to support a fully loaded refrigerator.
• 1/8" Drill bit and electric or hand drill	IMPORTANT NOTE: Protect the finish of the flooring.
• Tape measure
• Pencil	Cut a large section of the cardboard carton and place
• Wire cutters	under the refrigerator where you are working.
• 1/4" Nut driver
• Level

MATERIALS REQUIRED

•1/4" O.D. compression nut and 2 ferrules (sleeves) OR GE SmartConnect™ Refrigerator Tubing Kits

GROUNDING THE REFRIGERATOR

IMPORTANT – (Please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

4