GE Monogram Drawer Freezer Refrigerator installation instructions TOP Drawer

Installation Instructions

STEP 3 INSTALL THE REFRIGERATOR

BEFORE MOVING REFRIGERATOR INDOORS

IMPORTANT: Doors and passageways into the installation location require a 31" min. opening. If the opening is less than 31", the top cap, doors

and drawers must be removed. (See steps 4–6.)

NOTE: Skip steps 4–6 if door removal is not required. Go to page 9, Move The Refrigerator.

NOTE: To prevent damage, leave inside packaging, door spacer and outside protective wrap in place until the unit is moved to the installation location.

STEP 4 REMOVE THE FREEZER DRAWERS

The freezer drawers can be removed, if needed, to fit through tight areas.

Read these instructions completely and carefully.

TOP DRAWER

REMOVE THE BASKET

A. Open the freezer drawer until it stops.

B. Cut the 2 wire ties off of the basket with wire cutters. C. Lift the front end of the basket so that the front two alignment tabs come out of the slide bracket first.

D. Then rotate the front edge of the drawer up while lifting the remaining two rear alignment tabs out of the slide bracket. Pull the basket

up and out of the drawer.

A

D

C

REMOVE THE DRAWER FROT FROM THE SLIDES A. Remove the 8 hex head screws from the door

and remove the door.

B. Set the drawer front on a non-scratching surface. C. Push the rail assemblies back into the cabinet.

7