![](/images/new-backgrounds/1073010/7301017x1.webp)
Installation Instructions
STEP 6 REMOVE THE TOEKICK
If, after removing the freezer drawers and refrigerator door, the refrigerator will still not fit through a doorway, the toekick can be removed.
•Remove the toekick by removing the 2 Phillips head screws.
STEP 7 MOVE THE REFRIGERATOR
•Place a piece of the carton or soft cloth against the side panel of the refrigerator to pad and protect the stainless steel finish.
•Place the refrigerator on the handtruck with a side against the truck only.
•Move the refrigerator indoors. Place refrigerator close to the installation location.
STEP 8 REPLACE THE FREEZER DRAWERS
Two people may be required to complete this procedure.
TOP DRAWER
ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES
A. Pull out the rail assemblies to the full length on each side of the cabinet.
STEP 8 REPLACE THE FREEZER DRAWERS (CONT.)
B. Drive the bottom outside screw into the door on each side until it is all the way in.
Screw
C. Drive the remaining 3 screws on each side all the way into place (there are a total of 8
Screws
REPLACE THE FREEZER BASKET
Replace the top drawer freezer basket.
9