14
STEP 17 REMOVE PACKAGING
START ICEMAKER
A. Removeall tape, foam and protectivepacking from
shelves and drawers.
B. Remove the tie downs from the freezer baskets.
Set the icemaker power switch to the I (on) position.
The icemaker will not begin to operate until it reaches
its operating temperature of 15°F (–9°C) or below. It will
then begin operation automatically. It will take2–3 days
to fill the ice bin.
NOTE: In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver enough water
to the icemaker.
STEP 18 TEMPERATURE CONTROLS
The temperature controls are preset at 37°F
for the refrigerator and 0°F for the freezer.
Allow 24 hours to stabilize before making adjustments.
STEP 16 INSTALL TOEKICK
Press toekick into position and reinstall one screw on
each side.
IMPORTANT:The vented toekick must
remain unobstructed for proper air circulation.
Power Switch
213Dia14
Feeler Arm

213Dia5

Toekick Screw
Installation Instructions