Amana AOCD2770 Electrical Connection, Place Oven in Wall, Removal and Replacement of Oven, Option

Models: AOCD2770

1 32
Download 32 pages 53.39 Kb
Page 5
Image 5
Electrical Connection

Electrical Connection

!WARNING

To avoid risk of personal injury or electrical shock, do not ground through neutral wire if installation is in a mobile home or if local codes do not permit grounding through a neutral.

Improper connections of aluminum house wiring to copper lead can result in property damage, personal injury or fire. Use only connectors designed for joining copper to aluminum and follow manufacturers' recommended procedure closely.

1.With oven positioned in front of cabinet opening, connect wire leads extending from conduit to junction box. Verify neutral (white) wire is connected to appropriate terminal. Check local code to see which option should be used in grounding unit.

Option 1

Attach oven ground wire (green or bare) to junction box (if grounded) or a suitable ground.

Option 2

Connect oven ground wire (green or bare) to house ground feed wire (green, bare, or white). If grounding through white wire, observe above warning.

GRD

W

2.Connect red and black wires to appropriate house electrical wiring.

3.Verify wiring by connecting electrical power at fuse box and checking for proper operation of unit.

Some interior parts are finished with a protective coating of oil. When heated for first time oil will burn off and there will be some odor and smoke.

Place Oven in Wall

This procedure should be performed by 2 people.

1.Seal Openings in wall behind the oven or on floor under oven. Holes must be sealed before sliding oven into position.

2.Lift wall oven and slide into cutout.

3.Secure wall oven to cabinet with 4 screws.

A

A—Conduit

W—White neutral wire

GRD—Bare ground wire

Electrical Conduit and Wires

If oven is used in a mobile home or if local codes do not permit grounding through neutral, open connection and use grounding lead to ground unit in accordance with local codes. Connect neutral lead to branch circuit neutral conductor in usual manner.

Place Oven in Wall

Removal and Replacement of Oven

1.Disconnect power to oven at circuit breaker or fuse panel.

2.Remove screws securing oven to wall.

3.Remove oven and place oven aside.

4.Disconnect electrical conduit.

5.To reinstall oven, follow instructions in Installation section of this manual.

5

Page 5
Image 5
Amana AOCD2770 owner manual Electrical Connection, Place Oven in Wall, Removal and Replacement of Oven, Option