7.Attach power lead, red wire or black wire to right terminal. Secure with hex nuts provided.
Wires from range
(Number of wires on each terminal can vary)
| A |
|
|
|
|
| B |
|
|
| A | |||
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Converting 3-Wire to 4-Wire Power Cord
1.Remove rear wire cover.
2.Remove bottom cord clamp screw and retain for further use.
3.Remove screw/hex nuts from terminal block and retain for further use.
4.Remove all
5.To install the
Level Range
Wires from power cord
Attach Power Leads
7.Position grounding strap down and away from terminal block. Attach green or bare wire and grounding strap to back of range using green ground screw previously removed in step 3.
Wires from range
(Number of wires on each terminal can vary)
A
Wires from power cord
Attach Green or Bare Wire and Grounding Strap
8.Firmly tighten all connections to ensure proper electrical connection.
9.Place screw through strain relief, tighten, and replace rear wire cover.
!CAUTION
To avoid damaging oven door, do not lift or move range by oven door handle. Glass can break.
Carefully level range using legs provided. Range must be level to cook and bake uniformly.
•Place a level on top oven rack or on range top when leveling.
•Leveling legs must extended ¼ inch to engage
Removal and Replacement of Range
1.Disconnect power to range.
2.Slide range forward.
3.Unplug range cord and place range aside.
4.Remove
5.Install
6.To reinstall range, follow instructions in Installation section of this manual.
9
