Amana ASD2624HEQ Touch Temperature Controls, Select models, style varies by model

Temperature Controls

Touch Temperature Controls

(select models, style varies by model)

The controls are located at the top front of the refrigerator compartment.

Control

Adjusting the Controls

•24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below. See page 21 for instructions on checking compartment temperature.

•Except when starting the refrigerator, do not change either control more than one number at a time.

•Allow 24 hours for temperatures to stabilize.

Initial Control Settings

After plugging the refrigerator in, set the controls.

•Pressing the or pads adjusts the controls to the desired setting.

•Set the freezer control on 4.

•Set the refrigerator control on 4.

•Let the refrigerator run at least 8 to 12 hours before adding food.

Warm Cabinet Surfaces

At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when you first start the refrigerator, during hot weather and after excessive or lengthy door openings.

Temperature Control Guide

Refrigerator too warm Set the refrigerator control to next higher number by

pressing the pad.

Refrigerator too cold Set the refrigerator control to next lower number by

pressing thepad.

Freezer too warm	Set the freezer control to
	next higher number by
	pressing the	pad.
Freezer too cold	Set the freezer control to
	next lower number by
	pressing the	pad.
Turn refrigerator OFF	Press the freezer or
	refrigerator	pad until a
	dash “–” appears in the
	display.

9