Door Storage, Beverage Chiller/MiniChiller, Dairy Center

Fresh Food Features

Door Storage

Beverage Chiller™/MiniChiller™

(select models)

The Beverage Chiller™ and MiniChiller™ keep beverages and other items colder than the rest of the fresh food compartment. An air inlet directs air from the freezer into the chiller(s).

Controls

The chiller control is located on the left side wall of the fresh food compartment. Turn the control clockwise for colder temperature.

To Remove Chiller(s):

•Unload the chiller(s).

•Slide the assembly up and pull straight out.

Note

•If the chiller is installed directly under the dairy center or a door bucket, the bucket or dairy center will need to be removed before removing the chiller.

To Install Chiller(s)

•Align one of the air inlet holes with the hole cut-out on the door.

•Slide the assembly in and down so that the hooks are firmly seated on the door liner.

To Remove:

• Slide dairy center up and pull out.

To Install:

•Slide assembly in and down so that the hooks are firmly seated on the door liner.

To Remove Dairy Door:

• Press in sides of dairy door and pull out.

To Install Dairy Door:

•Slide sides of dairy door inside dairy center until hinge points snap into place.

Adjustable Deep Tilt-Out Door Buckets

(select models)

The Adjustable Deep Tilt-Out Door Bucket provides easy access to food items stored in the door.

To Remove Bucket:

• Tilt bucket out.

• Pull straight out of the bracket.

To Install Bucket:

•Tilt the front of the bucket down slightly.

•Slide into bracket and tip upright.

To Move Bucket Frame to Another Location:

• Remove bucket.

• Lift bracket up and pull straight out.

Place the bracket in a new location.

Note

•The chillers will not operate properly if the air intake hole is not aligned with the control location.

Dairy Center

The Dairy Center provides convenient door storage for spreadable items such as butter and margarine. This compartment can be moved to several different locations to accommodate storage needs.