Fresh Food Features
Shelves
CAUTION
To avoid personal injury or property damage, observe the following:
•Never attempt to adjust a shelf that is loaded with food.
•Confirm shelf is secure before placing items on shelf.
•Handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.
Your refrigerator has either Spillsaver™ or
To Remove a Shelf:
• Slightly tilt up the front and lift up the rear of the shelf, then pull the shelf straight out.
To Lock the Shelf Into Another Position:
•Tilt up the front edge of the shelf.
•Insert the hooks into the desired frame openings and let the shelf settle into place.
•Be sure the shelf is securely locked at the rear.
The Crisper Top serves as the lower fresh food shelf.
To Remove the Crisper Top:
•Remove drawers as indicated (see page 12).
•Place hand under the frame to push up the glass. Lift glass out.
•To install, repeat above instructions in reverse order.
SideGlide™ Shelves (select models)
SideGlide™ Shelves can be adjusted to create a full- width shelf, or to slide from side to side to accommodate storage needs.
To Remove Shelf Rail
Assembly:
• Lift rail assembly up to remove hooks from frame.
To Install Shelf Rail Assembly:
•Tilt up the front edge of the assembly.
•Insert the hooks into the desired frame openings and let the rail assembly settle into place.
•Be sure the rail assembly is securely locked into the frame.
To Install SideGlide™ Shelves for
•Tilt up the front edge of the shelf slightly.
•Hook the rear lip of the shelf over one of the rails on the shelf rail assembly.
•Let the shelf settle into place.
•Install the other SideGlide™ shelf on the same rail of the shelf assembly.
To Install SideGlide™ Shelves for
Sliding Side to Side:
•Tilt up the front edge of the shelf slightly.
•Hook the rear lip of the shelf over one of the rails on the shelf rail assembly.
•Let the shelf settle into place.
•Install the other SideGlide™ shelf on the other rail of the shelf rail assembly.
10
