INSTALLATION INSTRUCTIONS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools
Minimum Cutout Dimensions
23³⁄₄"
(60.3 cm)
listed here.
■ | Measuring tape | ■ | Drill |
■ | Pencil | ■ | 7/64" drill bit |
■ | Phillips screwdriver | ■ | Tape |
Parts Supplied
16⁷⁄₈"
(42.9 cm)
3" (7.6 cm)
| 1⁹⁄₁₆" |
| (4.0 cm) |
Width | A |
25" (63.5 cm) | |
| ¹¹⁄₁₆" |
(1.8 cm) |
B |
Duct base |
| Trim kit frame | |
|
| 1 | 2 |
Left duct |
| Templates 1 and 2 | |
Bottom bracket |
| Top bracket | |
13/16" screws (2) | 9/16" screws (16) | 1/2" screws (4 - painted) |
A. Trim kit frame overhang
B. Cutout for lower oven
NOTES:
■Height, width and depth measurements have ±1/16" (2 mm) tolerance.
■3" (7.6 cm) minimum dimension is from lower oven cutout ceiling to microwave oven cutout floor.
■Trim kit frame extends 11/16" (1.8 cm) below, and 1⁹⁄₁₆" (4.0 cm) above the cutout opening.
Trim Kit Frame Dimensions
Location Requirements
The microwave oven may be installed over a
The microwave oven may also be installed in a cabinet by itself (without a
26 | ⁷⁄₈" | (68.3 | cm)* | |
| ||||
29 |
| |||
|
|
| ||
³⁄₄" |
|
|
| |
| (75.6 | cm)** | ||
|
|
|
19¹⁄₈"
(48.6 cm)
24" | (61.0 | cm) |
| ||
|
|
1⁷⁄₁₆" (3.7 cm)* 2⁷⁄₈" (7.3 cm)**
⁷⁄₈" (2.2 cm)
Make sure the surrounding cabinetry has clearance to open and close freely. Allow a clearance of at least 1" (2.5 cm) below the cutout floor (3" [7.6 cm] for installation above a
| A | |
2" | 2" | |
(5.1 cm) | (5.1 cm) | |
B | B | |
1" | 3" | |
(2.5 cm) | ||
(7.6 cm) | ||
| ||
| C | |
D | 36" | |
(91.4 cm) | ||
| ||
E |
|
A. Upper cabinet | D. Lower cabinets |
B. Microwave oven cutout | E. Floor |
C. Lower oven cutout |
|
3" (7.6 cm)
*27" (68.6 cm) trim kit
**30" (76.2 cm) trim kit
2