LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

NOTES:

■It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

■Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54"

(137.16 cm) is recommended.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 2 Page 4
Page 3
Image 3
Amana W10180386A LocationRequirements, Electrical Requirements, Water Supply Requirements, Recommended Grounding Method
Page 2 Page 4

W10180386A, W10180388A specifications

The Amana W10180388A and W10180386A are two essential components for modern kitchen appliances, particularly designed for refrigerator models. These replacement parts enhance both functionality and efficiency of the refrigeration system, ensuring that your food storage needs are met with optimal performance.

The W10180388A is primarily a refrigerator water filter, which plays a crucial role in maintaining water quality. Its primary function is to reduce contaminants, including chlorine, lead, and other potentially harmful substances, providing you with clean and great-tasting water. The filter employs advanced filtration technologies that typically include activated carbon and other media, effectively trapping impurities while allowing beneficial minerals to pass through. This helps in preserving the natural flavor of water, making it ideal for drinking, cooking, and even making ice.

On the other hand, the W10180386A is a replacement ice maker assembly, which is essential for households that prioritize having fresh ice readily available. This component features a reliable ice-making mechanism designed to produce clear, delicious ice cubes efficiently. It operates quietly and efficiently, ensuring that you won’t be disturbed while it functions. The ice maker is built with durable materials and engineered for easy installation, allowing homeowners to quickly restore their appliance’s full ice-making capabilities without calling a technician.

Both products embody the commitment to quality that Amana is known for. They are designed for easy installation, often requiring no more than basic tools to replace. The user-friendly nature of these parts makes them accessible to the average homeowner, reducing maintenance costs and prolonging the lifespan of your appliances.

The W10180388A and W10180386A are also compliant with rigorous safety and performance standards, giving you peace of mind when it comes to your family's health. Regularly replacing the water filter helps ensure that contaminants are consistently reduced, while the ice maker's reliability guarantees you won't run out of ice when hosting gatherings.

In summary, the Amana W10180388A and W10180386A reflect the brand's commitment to innovation, quality, and customer satisfaction. These components not only improve the overall functioning of your refrigeration system but also enhance the experience of using your kitchen appliances, making them integral to any modern home.
Top Page Image Contents