4.Replace the bin by pushing it in all the way or the dispenser will not work. Push the wire shutoff arm down to the ON position to restart ice production. Make sure the door is closed tightly.

Style 2

1.Hold the base of the storage bin with both hands and press the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover (“flipper door”) on the left wall of the freezer stops the ice maker from producing ice if the door is open or the storage bin is removed.

2.Replace the storage bin on the door and push down to make sure it is securely in place.

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Water Filter Status Light (on some models)

The water filter status light will help you know when to change your water filter. The light will change from green to yellow. This tells you that it is almost time to change the filter. It is recommended that you replace the water filter when the status light changes to red OR water flow to your water dispenser or ice maker decreases noticeably. The filter should be replaced at least every 6 months depending on your water quality and usage.

After changing the water filter, reset the water filter status light. The status light will change from red to green when the system is reset.

Non-Indicator Water Filter (on some models)

If your refrigerator does not have the water filter status light, you should change the water filter cartridge at least every 6 months depending on your water quality and usage. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the water filter more often.

Using the Dispenser Without the Water Filter

You can run the dispenser without a water filter. Your water will not be filtered.

1.Remove the water filter.

2.Slide the cap off the end of the filter and replace the cap in the base grille.

IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.

1.Unplug refrigerator or disconnect power.

2.Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.

3.Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water.

4.There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency. If you need to clean the condenser:

■Remove the base grille.

■Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area of the condenser.

■Replace the base grille when finished.

5.Plug in refrigerator or reconnect power.

Changing the Light Bulbs

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. On some models, the dispenser light requires a heavy duty 10-watt bulb. All other lights require a 40-watt bulb. Replacement bulbs are available from your dealer.

1.Unplug refrigerator or disconnect power.

2.Remove light shield when applicable.

NOTE: To clean the light shield, wash it with warm water and liquid detergent. Rinse and dry the shield well.

3.Remove light bulb and replace with one of the same size, shape and wattage.

4.Replace light shield when applicable.

5.Plug in refrigerator or reconnect power.

8

Page 7 Page 9
Page 8
Image 8
Amana W10180388A, W10180386A Refrigerator Care, Water Filtration System, Cleaning, Changing the Light Bulbs
Page 7 Page 9

W10180386A, W10180388A specifications

The Amana W10180388A and W10180386A are two essential components for modern kitchen appliances, particularly designed for refrigerator models. These replacement parts enhance both functionality and efficiency of the refrigeration system, ensuring that your food storage needs are met with optimal performance.

The W10180388A is primarily a refrigerator water filter, which plays a crucial role in maintaining water quality. Its primary function is to reduce contaminants, including chlorine, lead, and other potentially harmful substances, providing you with clean and great-tasting water. The filter employs advanced filtration technologies that typically include activated carbon and other media, effectively trapping impurities while allowing beneficial minerals to pass through. This helps in preserving the natural flavor of water, making it ideal for drinking, cooking, and even making ice.

On the other hand, the W10180386A is a replacement ice maker assembly, which is essential for households that prioritize having fresh ice readily available. This component features a reliable ice-making mechanism designed to produce clear, delicious ice cubes efficiently. It operates quietly and efficiently, ensuring that you won’t be disturbed while it functions. The ice maker is built with durable materials and engineered for easy installation, allowing homeowners to quickly restore their appliance’s full ice-making capabilities without calling a technician.

Both products embody the commitment to quality that Amana is known for. They are designed for easy installation, often requiring no more than basic tools to replace. The user-friendly nature of these parts makes them accessible to the average homeowner, reducing maintenance costs and prolonging the lifespan of your appliances.

The W10180388A and W10180386A are also compliant with rigorous safety and performance standards, giving you peace of mind when it comes to your family's health. Regularly replacing the water filter helps ensure that contaminants are consistently reduced, while the ice maker's reliability guarantees you won't run out of ice when hosting gatherings.

In summary, the Amana W10180388A and W10180386A reflect the brand's commitment to innovation, quality, and customer satisfaction. These components not only improve the overall functioning of your refrigeration system but also enhance the experience of using your kitchen appliances, making them integral to any modern home.
Top Page Image Contents