AMC I-M15A ON/OFF Button Monitor Power On / Standby, CH Channel Up, CH Channel Down, Speaker Left

User manual-amc i-M15a_G

mode, the i-M15a will shut down automatically 5 minutes after the power adaptor is removed. This power saving feature will save the power of battery.

2.ON/OFF Button (Monitor Power On / Standby)

This is a toggle switch. It will work when power adaptor is plugged into i-M15a or Battery power is turned ON when power adaptor is not plugged into i-M15a.

When i-M15a is “Standby (OFF)”, you can press the button to turn i- M15a to ON. When i-M15a is “OFF” , you can press the button to turn i- M15a to “Standby (OFF)”

3.CH ▲ (Channel Up)

By pressing the CH ▲ button the i- M15a will send control signal through 802.11a to give command to equipment received the control signal with “Channel Up” command specified.

4. CH ▼ (Channel Down)

By pressing the CH ▼ button the i- M15a will send control signal through 802.11a to give command to equipment received the control signal with “Channel Down” command specified.

5. VOL ▲ (Volume Up)

By pressing the VOL ▲ button the Volume from L & R Speakers of i- M15a will increase (Up).

6. VOL ▼ (Volume Down)

By pressing the VOL ▼ button the Volume from L & R Speakers of i- M15a will decrease (Down).

7. Speaker - Left

Left Speaker of i-M15a.

8.Speaker – Right Right Speaker of i-M15a.

9.Main Power LED

The LED will turn “Green” when main power of i-M15a is “ON”.

The LED will turn “Orange” during i- M15a is at “Standby”

The LED will be “Off” when battery of the i-M15a is turned “Off”

The LED will never be “Off” when power adaptor plugged into i-M15a.

10.Battery Status LED

Green : Full Charged

Orange : Battery is Charging

Blinking Orange : Battery is low and i-T15a will be turned off automatically.

No light : Once Battery Full Charged the LED will turn off when i-M15a is turned on or the power adaptor is removed.

Page 7 of 12

PN: 21-i-M15a_IM