DCA-600SSK— GENERATOR START-UP PROCEDURE (MANUAL)

5.Set the battery ON/OFF switch (Figure 45) to the “ON” position.

11.The generator's frequency meter (Figure 50) should be displaying the 60 cycle output frequency in HERTZ.

Figure 45. Battery ON/OFF Switch

6.When starting the generator in COLD weather conditions, turn the ignition key to the “PREHEAT ”position (Figure 46),

Figure 50. Frequency Meter (Hz)

12.The generator's AC-voltmeter (Figure 51) will display the generator’s output in VOLTS. If the voltage is not within the specified tolerance, use the voltage adjustment control knob (Figure 52) to increase or decrease the desired voltage.

Figure 46. Ignition Switch (Pre-Heat)

7.Verify that the pre-heat lamp(Figure 47) is lit (ON) before starting engine.

Pre-Heat

Lamp

Figure 47. Pre-Heat Lamp

8.Place the engine throttle lever in the “LOW” position (Figure 48).

Figure 48. Engine Throttle Control

9.Turn the ignition key to the “START” position (Figure 49) and listen for the engine to begin cranking. After the engine starts release the ignition key.

Figure 49. Engine Ignition Switch

10.Once the engine has started, let it run for 3-5 minutes, then turn the throttle handle control (Figure 48) to the “HIGH” position.

Figure 51. AC Voltmeter

Figure 52. Voltage Adjust Control Knob

13.The ammeter (Figure 53) will indicate zero amps with no load applied. When a load is applied, the ammeter will indicate the amount of current that the load is drawing from the generator.

Figure 53. Ammeter (No Load)

PAGE 46 — DCA-600SSK — OPERATION AND PARTS MANUAL (STD) — REV. #7 (04/30/10)

Page 46
Image 46
Multiquip DCA-600SSK- Generator START-UP Procedure Manual, Set the battery ON/OFF switch to the on position

DCA-600SSK specifications

The Multiquip DCA-600SSK is a rugged, reliable, and high-performance mobile generator that caters to a wide range of applications, from construction sites to outdoor events. Designed for durability and efficiency, the DCA-600SSK is notable for its robust construction and advanced technologies that ensure reliable power delivery.

At its core, the DCA-600SSK is powered by a reliable, fuel-efficient diesel engine. This engine not only provides consistent power output but also offers extended run times, making it ideal for long-duration use in remote locations. The generator delivers a remarkable 600 kVA of power, allowing it to support heavy machinery or multiple smaller loads simultaneously.

One of the standout features of the DCA-600SSK is its impressive sound attenuation design. The generator is enclosed in a weather-resistant, sound-attenuated housing that significantly reduces noise levels, making it suitable for use in noise-sensitive environments, such as residential areas or events.

Additionally, the DCA-600SSK is equipped with a user-friendly digital control panel that provides comprehensive monitoring capabilities. This panel includes features such as voltage and frequency regulation, along with automatic start/stop functionality, which enhances both ease of use and operational efficiency. The digital display allows operators to monitor critical parameters at a glance, ensuring optimal performance and safety.

The generator is also designed with mobility in mind. It comes with forklift pockets and lifting hooks, making it easy to transport and relocate. This portability ensures quick setup and deployment, which is especially advantageous in dynamic job sites or temporary power needs.

Another important characteristic of the DCA-600SSK is its dual-frequency capability. It can operate at either 50 Hz or 60 Hz, making it versatile for international applications. This adaptability enables users to utilize the generator in various regions without modifying equipment or loads significantly.

Finally, safety features are paramount in the design of the DCA-600SSK. It includes fully automatic safety shutdowns for low oil pressure, high coolant temperature, and overload protection, safeguarding the generator from potential damage and ensuring dependable performance in demanding conditions.

In summary, the Multiquip DCA-600SSK is a powerhouse generator combining high performance, advanced technology, and user-centric design. Its efficiency, portability, and durability make it an excellent choice for professionals seeking reliable power solutions in various settings.