Multiquip DCA-600SSK - GENERATOR OUTPUTS, Generator Ampere Ratings - 3Ø, Generator Amperage

DCA-600SSK — GENERATOR OUTPUTS

Generator OutputVoltages

A wide range of voltages are available to supply voltage for many different applications. Voltages are selected by apply- ing jumpers (6) to the voltage change-over board (Figure 15). To obtain some of the voltages as listed in Table 7 (see below) will require a fine adjustment using the voltage regu- lator (VR) control knob located on the control panel.

Voltage Change-Over Board

The voltage change-over board (Figure 15) is located on the control box, behind the generator control panel. This board has been provided for ease of voltage selection.

Generator Amperage

Tables 8 and 9 describe the generator’s current output capa- bility for both 1Ø-phase and 3Ø phase applications.

Table 8. Generator Ampere

Ratings — 1Ø

kW	139V	240V	277V	480V
40	288	167	144	83
80	576	333	289	167
120	863	500	433	250
160	1,151	667	578	333
200	1,439	833	722	417
240	1,727	1,000	866	500
280	2,014	1,167	1,011	583
320	2,302	1,333	1,155	667
360	2,590	1,500	1,300	750
400	2,878	1,667	1,444	833
440	3,165	1,833	1,588	917
480 (max)	3,453	2,000	1,733	1,000

Figure 15. Voltage Change-Over Board

240V Configuration

DANGER - CHANGING JUMPER PLATES

NEVER attempt to place jumper plates on the voltage change-over board while the generator is in operation.There exists the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even death!

Table 7. Generator Available Voltages

Three-Phase	208V	220V	240V	416V	440V	480V
Single-Phase	120V	127V	139V	240V	254V	277V

Table 9. Generator Ampere

Ratings — 3Ø

kW	240V	480V
40	120	60
80	241	120
120	361	180
160	481	241
200	601	301
240	722	361
280	842	421
320	962	481
360	1,083	541
400	1,203	601
440	1,323	662
480(max)	1,443	722

PAGE 36 — DCA-600SSK — OPERATION AND PARTS MANUAL (STD) — REV. #7 (04/30/10)