Replacing the Battery
Figure 17. Removing the power cable from the BBU module
Press down on the
3Remove the remote battery board from your system.
a Press down on the top of the battery module to free the clip on the bottom of the module.
b While pressing down on the top of the battery module, lift out the bottom of the battery module slightly.
c Once the bottom of the module is free, slide the module up to release the clips on the top.
Figure 18. Removing the battery module
2 | 2 | 3 | 3 |
1 |
|
|
|
| 2 |
| 3 |
|
|
| |
1 |
|
|
|
|
| 1 |
|
|
| 3 |
|
Bottom clip
a)Push the battery module down gently.
b)Lift out the bottom of the battery module to release the clip on the bottom edge.
c)Lift up to remove the clips on the top edge.
www.3ware.com | 25 |
