To install the control module

Installing the Control Module

Note: The following illustrations show the 9690SA-4I4E. If you have a 9690SA-8E the location of the control module post hole will be different.

1Remove the screw head from the plastic post on the BBU control module and set it aside (you will reattach it soon.)

Figure 11. Removing the head from the plastic post

2Position the BBU control module above the controller (Figure 12) and align the BBU control module and the controller, making sure to:

Mate the connector on the BBU control module with the receptacle on the controller.

Match the plastic post on the BBU with the hole on the controller.