AMCC manual Cables, Port 3ware 9690SA-8E Serial ATA RAID Controller

Chapter 1. Getting Started

Figure 4. 8-Port 3ware 9690SA-8E Serial ATA RAID Controller

Two external Multi-lane	BBU connector and hole for post
connectors

Heat Sinks

Figure 5. 8-Port 3ware 9690SA-4I4E Serial ATA RAID Controller

One external Multi-lane	BBU connector and hole
	I2C
	connector
	One internal
	Multi-lane
	connector
Heat Sinks

Cables

Important: You should only use AMCC/3ware certified cables with your 3ware RAID controller. Using an incorrect cable can result in drives that are not detected. The appropriate cables are included with your controller. If you must replace a cable, see the list of available cables and associated part numbers at http://3ware.com/products/cables.asp.

43ware 9690SA SAS/SATA RAID Controller Installation Guide