GB

The HEPA Type Filter:

a. The HEPA Type Filter is recognised by the pleated fi lter material being covered by an active carbon fi lter on one side and an Accelerant Deoderisation fi lter on the other side. All of the filter layers are fitted into a plastic filter frame.

b. The HEPA Type Filter assembly is for one time use. It cannot be washed. It should be replaced after about 8 months of normal use.

c. The replacement HEPA Type Filter assembly can be purchased from your AM90 supplier or Amcor.

ROUTINE SERVICE AND CLEANING

Regular maintenance of the unit will keep it operating at maximum effectiveness.

CAUTION: To reduce the risk of injury, unplug the unit before cleaning or filter servicing.

Unit cleaning

Clean the outside of the unit at least once a week with a damp paper towel moistened with a common household detergent.

Cleaning the area around the unit

It is recommended to wipe the area around the air purifier once a week with a wet paper towel in order to remove any accumulation of dust.

TECHNICAL DATA

Model:

AM90

Mains:

220-240 V / 50 Hz

Current:

0.25 Amps

Ozone:

Much lower than International safety limits.

Installation:

No installation required.

Power Consumption: 45 W (High blower speed)

Fan Speed:

High, Medium and Low

Coverage:

40 m2

Dimensions:

370 x 180 x 500 mm (W x D x H)

Airflow rate:

High speed: 150 m3/h

Net Weight:

4.5 kg

Ionisation

Total negative ion output:

2.5x 1012 = 2.5 trillion negative ions per second.

* Subject to changes without notification.

9

Page 9
Image 9
Amcor AM90 instruction manual Routine Service and Cleaning, Technical Data