Operation
6 |
| 5 |
| 4 |
| 3 |
| 2 |
| 1 |
When the power cord is connected to the electrical outlet, the unit is ready for operating after a short buzzing sound.
1. ON/OFF 
Press the ON/OFF BUTTON to switch on. The cooler will work in HI cooling mode (or- ange indicator light), the on/off indicator 
turns green.
When the cooler is running, press the ON/OFF BUTTON to switch it off.
2. Cooling 
Press the 
BUTTON to select the level of cooling, the corresponding LED will lit: 
HI (orange) for strong cooling or 
LO (green) for mild cooling.
3. Dehumidifying 
Press the 
BUTTON to select the required level of dehumidification, the louvre will close and the unit will start to dehumidify, the corresponding LED will lit:
LO (green) for mild dehumidification or 
HI (orange) for strong dehumidification. When the relative humidity in the room is high and you want to dry the room quickly, use the HI dehumidification.
4. Fan speed 
Press the 
BUTTON to select the required fan speed, the corresponding LED will lit: 
- LO (green) for low speed or 
- HI (orange) for high speed.
5. Timer 
Press the 
BUTTON to select for how many hours the cooler should continue to operate: 2, 4 or 8 hours, the corresponding LED (2H, 4H or 8H) will turn green. The unit will stop working once the selected time has run down.
When the compressor is shut down artificially, the timer needs to be reset. But if the compressor is stopped due to water tank full condition or defrosting, the timer setting will remain as set.
6
