AutoDrain NanoMist Technology™ Assembly
Positioning
This unit can easily be moved from one room to another. In doing so keep this in mind:
1
Stretch end of the hose slightly.
Attach Window Slide Bar Connector to Exhaust Hose by twisting as shown.
2
Put spiral water pipe into hot air flexible hose.
•The air conditioner must stand upright on an even surface.
•Do not position near bath, sink, or other permanent wet or damp area.
•Keep unit at least 18" from wall, curtains, draperies, to insure adequate air circulation.
3
5
7
Connect the | 4 | |
female half of the | ||
quick connector |
| |
at the end of the |
| |
spiral water pipe |
| |
to the male part |
| |
in the hot air |
| |
outlet pipe. |
| |
Stretch end of |
| |
| ||
6 | ||
the hose slightly. | ||
Assemble the hot |
| |
air hose on the |
| |
unit by screwing |
| |
in clockwise. |
| |
|
|
Unfold flexible | 8 |
hose with attached | |
hose adapter |
|
connector, and |
|
snap into |
|
Window Slide Bar. |
|
|
|
Turn the connector 90º clockwise until it is locked in place.
Clip on the water atomizer at the end of the spiral pipe to the holder.
Only
Required For
Disassembly.
In order to unlock the quick connector, push the tab and turn the connector 90º clockwise.
2a |
2b |
Installing Exhaust Hose to Window Slide Bar
After assembling Innovative AutoDrain NanoMist Technology™ per instructions on page 5, make sure hose is firmly attached to oval connecter that fits into window slide bar.
Snap hose connecter into window slide bar opening. See Illustration 1.
Extend window slide bar to fit your window opening, either vertical or horizontal, depending on how the window opens. See Illustrations
Important
The flexible exhaust hose can be extended from 12" to 60" for mounting.
This length has been designed especially according to the specifications of the air conditioner.
Do not use an extension or exchange for a different hose as that may lead to malfunctioning.
The exhaust air must flow freely, any blockage can lead to overheating of the air conditioner. Take care to prevent any kink or bend in the exhaust hose.
5 | 6 |