•USB Controller
Enabled | Enabled USB Controller. (Default Value) |
Disabled | Disabled USB Controller. |
•USB Legacy Support
Keyboard/FD
D
KB/Mouse/F
DD
Disabled
Set USB Legacy Support Keyboard / Floppy.
Set USB Legacy Support Keyboard / Mouse /Floppy.
Disabled USB Legacy Support Function. (Default
Value)
•BIOS Flash Protection
Enabled | BIOS Flash Write Protection. |
Disabled | Normal. (Default Value) |
•DRAM Drive Strength
Auto | Set DRAM Drive Strength Auto. (Default Value) |
|
Manual | Set DRAM Drive Strength Manual. |
|
If DRAM Drive Strength is Manual, then you can adjust item below.
•MD Bus Strength
High | Set MD Bus Strength High. (Default Value) |
Low | Set MD Bus Strength Low. |
•CAS Bus Strength
High | Set CAS Bus Strength High. (Default Value) |
Low | Set CAS Bus Strength Low. |
•Delay DRAM Read Latch
1.0ns |
| Set DRAM Read Latch Delay 1.0ns. (Default Value) |
1.5ns |
| Set DRAM Read Latch Delay 1.5ns. |
0.5ns |
| Set DRAM Read Latch Delay 0.5ns. |
No delay |
| Set DRAM Read Latch No delay. |
|
•Memory Data Drive
6 mA |
| Set Memory Data Drive 6 mA. |
8 mA |
| Set Memory Data Drive 8 mA. (Default Value) |
•SDRAM Command Drive
16 mA | Set SDRAM Command Drive 16 mA. |
24 mA | Set SDRAM Command Drive 24 mA. (Default Value) |
•Memory Address Drive
16 mA | Set Memory Address Drive 16 mA. |
24 mA | Set Memory Address Drive 24 mA. (Default Value) |
•CAS# Drive
8 mA | Set CAS# Drive 8 mA. |
12 mA | Set CAS# Drive 12 mA. (Default Value) |
•RAS# Drive
16 mA | Set RAS# Drive 16 mA. |
24 mA | Set RAS# Drive 24 mA. (Default Value) |
27
