BIOS Setup
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in
ENTERING SETUP
Power ON the computer and press <Del> immediately will allow you to enter Setup. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" bottom on the system case. You may also restart by simultaneously press <Ctrl> − <Alt>− <Del> keys.
CONTROL KEYS
<↑ >
<↓ >
<← >
<→ >
<Esc>
<+/PgUp>
<F1>
<F2>
<F3>
<F4>
<F5>
<F6>
<F7>
<F8>
<F9>
<F10>
Move to previous item
Move to next item
Move to the item in the left hand
Move to the item in the right hand
Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page Setup Menu
Reserved
Reserved
Reserved
Restore the previous CMOS value from CMOS, only for Option Page Setup Menu
Load the default CMOS value from BIOS default table, only for Option Page Setup Menu
Load the Setup Defaults
Reserved
Reserved
Save all the CMOS changes, only for Main Menu
GETTING HELP
Main Menu
The
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.
21
