AMD GA-M61SME-S2 user manual Copy Bios completed Pass Please press any key to continue

c . Select the BIOS file and press ENTER.

Make sure again the BIOS file matches your motherboard model.

Step 2: The process of system reading the BIOS file from the floppy disk is displayed on the screen. When the message "Are you sure to update BIOS?" appears, press ENTER. The BIOS update will begin and the current process will be displayed.

1. Do not turn off or restart the system when the system is reading/updating the BIOS.

2. Do not remove the floppy disk or hard drive/USB drive when the system is updating the BIOS.

Step 3: When the update process is complete, press any key to return to the Q-Flash main menu.

Q-Flash Utility v2.02

Flash Type/Size	SST 25LF040A	512K
Keep DMI Data	Enable

!! Copy BIOS completed - Pass !!

	Please press any key to continue
Enter		Off

Step 4: Press ESC and then ENTER to exit Q-Flash and the system will restart. As the system reboots, you will see the new BIOS version during POST.

Step 5: As the system reboots, press DELETE to enter BIOS Setup. Select Load Optimized Defaults and press ENTER to load BIOS defaults. System will re-detect all peripherals devices after BIOS update, so we recommend that you reload BIOS defaults.

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software

`	Standard CMOS Features	Load Fail-Safe Defaults
`	Advanced BIOS Features	Load Optimized Defaults
`	Integrated Peripherals	Set Supervisor Password
`	Power Management Setup	Set User Password
		Load Optimized Defaults (Y/N)? Y
`	PnP/PCI Configurations	Save & Exit Setup
		Exit Without Saving
`	PC Health Status
ESC: Quit		KLJI: Select Item
F8: Q-Flash		F10: Save & Exit Setup
		Load Optimized Defaults

Press Y to load BIOS defaults

Step 6: Select Save & Exit Setup and then press Y to save settings to CMOS and exit BIOS Setup. When the system restarts, the whole update process is complete.

- 55 - Appendix