AMD GA-M61SME-S2 user manual Power Management Setup

2-4	Power Management Setup
			CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
				Power Management Setup
	ACPI Suspend Type			[S1(POS)]		Item Help
	Soft-Off by Power button			[Instant-off]		Menu Level`
	PME Event Wake Up			[Enabled]
	Modem Ring On			[Enabled]
	USB Resume from Suspend			[Enabled]
	Power-On by Alarm			[Disabled]
x Day of Month Alarm				Everyday
x	Time (hh:mm:ss) Alarm			0 : 0 : 0
	HPET Support (Note)			[Enabled]
	HPET Mode (Note)			[32-bit mode]
	Power On By Mouse			[Disabled]
	Power On By Keyboard			[Disabled]
x KB Power ON Function				Enter
	AC Back Function			[Soft-Off]
KLJI: Move		Enter: Select		+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values			F6: Fail-Safe Defaults		F7: Optimized Defaults
	ACPI Suspend Type
	S1(POS)		Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
	S3(STR)		Set ACPI suspend type to S3/STR(Suspend To RAM).
	Soft-Off by Power button
	Instant-off		Press power button then Power off instantly. (Default value)
	Delay 4 Sec		Press power button 4 seconds to Power off. Enter suspend if button is pressed
			less than 4 seconds.
	PME Event Wake Up
	This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
	Disabled		Disable this function.
	Enabled		Enable PME as wake up event. (Default value)
	Modem Ring On
	An incoming call via modem can awake the system from any suspend state.
	Disabled		Disable Modem Ring on function.
	Enabled		Enable Modem Ring on function. (Default value)
	USB Resume from Suspend
	Disabled		Disable this function.
	Enabled		Enable USB device wake up system from suspend mode. (Default value)

(Note) Supported on Vista operating system only.

- 39 - BIOS Setup