Setting Up 4-Channel Audio
STEP 1 :
After installation of the audio driver, you should find an Audio Manager
icon in your system tray (you can also find the icon in Control Panel). Double- click the icon to open the Audio Control Panel.
STEP 2:
In the Audio Control Panel, click the Audio I/O tab. In the upper left list, click 4CH Speaker.
STEP 3:
Connect the 4-channel speakers to the audio jacks on the motherboard and the surround cable, a small window will pop up and ask you what type of equipment is connected. Choose a device depend- ing on the type of speaker connected (4-channel audio consists of Front Speaker Out (Line Out) and Rear Speaker Out) and then click OK. The 4- channel audio setup is completed.
GA-M61SME-S2 Motherboard | - 70 - |
